Abus WIRELESS ALARM SYSTEM Instrukcje Operacyjne Pobierz pdf (Strona 15)

2.3 LEDs and their meaning

The LED in the top left-hand corner of the ABUS wireless alarm system tells you at a

glance what the current system state is. The LEDs and their meaning are described in

the following. (Some LEDs have extra functions that will be explained later.) The LEDs

are described from top to bottom.

2.3.1 Operation LED (green LED at the top)

The OPERATION LED shows whether the system is operating.

State Description

The system is functioning normally on a DC

power supply. The battery state is normal.

OFF

System failure; no power available (mains

and battery failed)

FAST FLASHING

AC power fault

SLOW FLASHING

Battery fault

2.3.2 Active LED (red LED at position 2)

The ACTIVE LED shows whether the system is activated/armed.

State Description

The system is completely or partly

activated/armed.

OFF

The system is completely

deactivated/disarmed.

FAST FLASHING

The system is in exit delay mode (see

section 1.1, “Alarm technology terms”).

SLOW FLASHING

An alarm is displayed.

The ABUS wireless alarm system is in

“alarm memory” mode following the

triggering of an alarm.

To reset the display to normal, press

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

Brak uwag

Abus WIRELESS ALARM SYSTEM Instrukcje Operacyjne Strona 15